Table of Contents
Advertisement
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
1)
Press as to select [SCHEDULE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f The [STANDBY MODE] setting will be fixed to [NORMAL] and cannot be changed when [SCHEDULE] is set to [ON]. The [STANDBY
MODE] setting will not change back when [SCHEDULE] is set to [OFF] in this condition.
f When [SCHEDULE] is set to [ON], the schedule of the signage play will stop. The schedule of the signage play will not work even when
[SCHEDULE] is set to [OFF] in this condition.
How to assign a program
1)
Press as to select [SCHEDULE].
2)
Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3)
Select and assign a program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. "- - -" indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1)
Press as to select [SCHEDULE].
2)
Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3)
Press as to select [PROGRAM EDIT].
4)
Press qw to select a program number, and press the <ENTER> button.
5)
Press as to select a command number, and press the <ENTER> button.
f You can turn the page using qw.
6)
Press as to select [TIME], and press the <ENTER> button.
f The projector is in the adjustment mode (the time is blinking).
7)
Press qw to select "hour" or "minute", and press as to set a time, and then press the <ENTER>
button.
8)
Press as to select [COMMAND].
9)
Press the <ENTER> button.
f The [COMMAND] detailed setting screen is displayed.
10) Press as to select a [COMMAND].
[COMMAND]
[POWER ON]
[STANDBY]
f After Step 8), you can press qw to select [COMMAND].
Chapter 4 Settings — [SETUP] menu
Disables the schedule function.
Enables the schedule function. Refer to "How to assign a program" (x page 79) or "How to set a
program" (x page 79) for how to set the schedule.
Switches on the projector.
Enters standby.
Description
ENGLISH - 79
Advertisement
Table of Contents
