Chapter 2 Getting Started — Installing/removing the projector
2)
Remove the adapter cover.
f While pushing both tabs at the upper side of the adapter cover inward (i), pull the cover in the direction of
the allow (ii) shown in the figure to remove.
3)
Remove the adapter from the track system.
f While pressing the hook end of the adapter, turn the adapter body 90° counterclockwise, and remove the
adapter from the track system.
4)
Remove the safety wire.
Ceiling foundation
(Field edge or
reinforcing material)
Ceiling material
(Gypsum board, etc.)
Tab
(i)
Hook
Adapter body
Ceiling
Track system
Shaft holder
(ii)
Hook
Tapping screw
Pole
Bracket
Cables from main unit
to power supply unit
(ii)
Safety wire
(i)
Ceiling hole
Bracket
Tapping screw
ENGLISH - 41