Printhead removal
1.
Remove the scanner assembly.
2.
Remove the top cover. See
3.
Disconnect the cables.
4.
Remove the toroid (A) from the ribbon cable.
5.
Remove the three screws (B).
6.
Remove the printhead.
Installation note:
When the printhead is replaced, perform the registration (black planes) and alignment (color planes). See
"Registration" on page 3-4
4-56
Service Manual
See"Flatbed removal" on page
"Top cover assembly removal" on page
B
and
"Alignment" on page
4-72.
4-9.
3-7.
Y112730-2