Maytag MHN33PRCWW Installation Instructions Manual page 13

CODE
HOT TEMPERATURE UPGRADE PRICE
H. 00
HOT
H. 00 Increase from 0–200 by pressing the UPPER LEFT
key pad and decrease by pressing LOWER LEFT
key pad. Factory default for 0 coins = $0.00
g Press the LOWER MIDDLE key pad once to advance
to next code.
H. 01 EXTRA RINSE UPGRADE PRICE
EXTRA
RINSE
H. 01 Increase from 0–200 by pressing the UPPER LEFT
key pad and decrease by pressing LOWER LEFT
key pad. Factory default for 0 coins = $0.00
g Press the LOWER MIDDLE key pad once to advance
to next code.
COIN/DEBIT OPTION
J. Cd
J. Cd Both coin and debit selected. Press the UPPER
RIGHT key pad 3 consecutive times for this
selection.
J. C_ Coins selected, debit disabled. Press the UPPER
RIGHT key pad 3 consecutive times for this
selection.
J. _d PR models factory default to J._d. Debit Card
selected, coins disabled. Press the UPPER RIGHT
key pad 3 consecutive times to change this
selection.
J. Ed Enhanced Debit is self-selected when a Generation
2 card reader is installed in the washer. The Ed
option cannot be manually selected or deselected.
g Press the LOWER MIDDLE key pad once to advance
to next code.
L. 00 PRICE SUPPRESSION OPTION
This option causes the customer display to show
'ADD' or 'AVAILABLE' rather than the amount of
money to add. (Used mainly in debit installations.)
L. 00 Not Selected 'OFF.'
L. PS Selected 'ON.' Press the UPPER RIGHT key pad
once for this selection.
g Press the LOWER MIDDLE key pad once to advance
to next code.
n. CE CLEAR ESCROW OPTION
When selected, money held in escrow for
30 minutes without further escrow or cycle activity
will be cleared.
n 00 Not Selected 'OFF'.
n CE Selected 'ON'. Press the UPPER RIGHT key pad
once for this selection.
g Press the LOWER MIDDLE key pad once to advance
to next code.
r. 800 TOP SPIN SPEED RPM
r. 800 This can be selected from the following spin speeds:
600 rpm, 750 rpm, 800 rpm, 1000
(displays as 999) rpm. Step between speeds by
pressing the UPPER RIGHT key pad. Factory default
of 800 rpm.
Press the LOWER MIDDLE key pad once to advance
g
to next code.
EXPLANATION CODE
PENNY INCREMENT OFFSET
U. 00
U. 00 This represents the penny increment price offset
used in Generation 2 (Enhanced Debit) PR models.
Choose from 0–4 pennies by pressing the LOWER
LEFT key pad.
g Press the LOWER MIDDLE key pad once to advance
to next code.
A1. 03 PREWASH LENGTH
A1. 03 This is the number of minutes of PREWASH. Select
between 2 and 7 minutes by pressing the UPPER
LEFT key pad to increase or the LOWER LEFT key
pad to decrease.
g Press the LOWER MIDDLE key pad once to advance
to next code.
A2. 03 FINAL SPIN LENGTH
A2. 03 This is the number of minutes of final high speed
spin. Choose from 3–8 minutes by pressing the
UPPER LEFT key pad to increase or the LOWER LEFT
key pad to decrease.
g Press the LOWER MIDDLE key pad once to advance
to next code.
A3. 02 NORMAL CYCLE SETTINGS
A3. 02 Allows the owner to select the cycle default options
of Water Temperature, Prewash, and Extra Rinse.
See Table 1 for specific settings. Normal is set to
02 from the factory. The UPPER LEFT and LOWER
LEFT key pads change the values.
A4. 00 DELICATES CYCLE SETTINGS
A4. 00 Allows the owner to select the cycle default options
of Water Temperature, Prewash, and Extra Rinse.
See Table 1 for specific settings. Delicates is set to
00 from the factory. The UPPER LEFT and LOWER
LEFT key pads change the values.
A5. OF POWER WASH CYCLE SETTINGS
A5. OF Allows the owner to select the cycle default options
of Water Temperature, Prewash, and Extra Rinse.
See Table 1 for specific settings. Power Wash is
set to OF from the factory. The UPPER LEFT and
LOWER LEFT key pads change the values.
A3, A4, Extra Prewash Wash
or A5 Rinse Temp
00 Off Off Cold
01 Off Off Cold
02 Off Off Warm
03 Off Off Hot
04 Off On Cold
05 Off On Cool
06 Off On Warm
07 Off On Hot
EXPLANATION
Table 1
A3, A4, Extra Prewash
or A5 Rinse
08 On Off
09 On Off
0A On Off
0b On Off
0c On On
0d On On
0E On On
0F On On
Wash
Temp
Cold
Cold
Warm
Hot
Cold
Cool
Warm
Hot
13