Maytag MHN33PRCWW Installation Instructions Manual page 12

CODE
TIME-OF-DAY CLOCK, MINUTES
5. 00
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the LOWER LEFT
key pad.
g Press the LOWER MIDDLE key pad once to advance
to next code.
6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses MILITARY TIME or 24 hr. clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the LOWER LEFT
key pad.
g Press the LOWER MIDDLE key pad once to advance
to next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses MILITARY TIME or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours. Select START
HOUR by pressing the LOWER LEFT or UPPER
LEFT key pad.
g Press the LOWER MIDDLE key pad once to advance
to next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses MILITARY TIME or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours. Select STOP
HOUR by pressing the LOWER LEFT or UPPER
LEFT key pad.
g Press the LOWER MIDDLE key pad once to advance
to next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that particular
day (9.10). A number followed by an 'S' indicates
selected for that day (9.1S).
Days of the week (1–7) are selected by pressing
the LOWER LEFT key pad. Press the UPPER RIGHT
key pad once to select special pricing for each
day chosen.
When exiting set-up code '9', the display must show
current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
Press the LOWER MIDDLE key pad once to advance
g
to next code.
A. 00 VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
A. 00 Not Selected 'OFF'.
A. SC Selected 'ON'. Press the UPPER RIGHT key pad
once for this selection. When selected, the money
and/or cycle counts will be viewable (if counter
option(s) is selected) when the coin box
is removed.
g Press the LOWER MIDDLE key pad once to advance
to next code.
12
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
VALUE OF COIN 1
b. 05
b. 05 This represents the value of coin 1 in number
of nickels: 05 = $0.25.
By pressing the LOWER LEFT key pad, there is an
option of 1–199 nickels.
g Press the LOWER MIDDLE key pad once to advance
to next code.
C. 20 VALUE OF COIN 2
C. 20 This represents the value of coin 2 in number
of nickels: 20 = $1.00.
C. 05 PR MODELS ONLY: Factory default of $0.25.
By pressing the LOWER LEFT key pad, there is the
option of 1–199 nickels.
Press the LOWER MIDDLE key pad once to advance
g
to next code.
COIN SLIDE OPTION
d. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. Replacement of meter case will
be needed for coin slide mounting.
d. 00 Not Selected 'OFF'.
d. CS Selected 'ON'.
NOTE: This option needs to be set to '00' unless
the meter case has been changed to accept a coin
slide device. Press the UPPER RIGHT key pad 3
consecutive times for this selection.
When coin slide mode is selected, set 'b'. equal to
value of vend price in nickels. Set set-up code 6 xx
(regular cycle price) and set-up code 3.xx (special
cycle price) to number of slide operations. If the
installer sets-up 'CS' and a coin drop mechanism
is installed, the washer will not register coins that
are inserted.
Press the LOWER MIDDLE key pad once to advance
g
to next code.
E. 00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the dollars-and-cents amount.
E. 00 Not Selected 'OFF'.
E. AC Selected 'ON'. Press the UPPER RIGHT key pad 3
consecutive times for this selection.
g Press the LOWER MIDDLE key pad once to advance
to next code.
H. 00 COOL TEMPERATURE UPGRADE PRICE
COOL
H. 00 Increase from 0–200 by pressing the UPPER LEFT
key pad and decrease by pressing LOWER LEFT
key pad. Factory default for 0 coins = $0.00
Press the LOWER MIDDLE key pad once to advance
g
to next code.
WARM TEMPERATURE UPGRADE PRICE
H. 00
WARM
H. 00 Increase from 0–200 by pressing the UPPER LEFT
key pad and decrease by pressing LOWER LEFT
key pad. Factory default for 0 coins = $0.00
g Press the LOWER MIDDLE key pad once to advance
to next code.
EXPLANATION