Speaker Installation Options - Panasonic SC-PT550 Operating Instructions Manual

Speaker assembly (continued)

Speaker installation options

Speaker installation options
7 Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
• The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k per screw. Consult a
qualifi ed building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall
and speakers.
1 Drive the screw (not included) into the wall
Ø4.0 mm
Wall or pillar
*
Front and Surround speakers:
Front speakers:
7 Fitting speaker stands
(For center and satellite surround speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
• The stands must be able to support over 10 k .
• The stands must be stable even if the speakers are in a high position.
Example: Center speaker
Plate thickness plus
7 mm to 10 mm
7 Reattach the speaker cable
Leave about
80 mm
10
RQT8043
At least 30 mm
Ø7.0 to 9.4 mm
4.0 to 6.0 mm
For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait
For Continental Europe, Australia and N.Z.
(not included)
5 mm, pitch 0.8 mm
60 mm
2 Pull out the
cable through
the hole.
2 Fit the speaker securely onto the screw(s) with the hole(s).
*
Front/Surround speakers
Attach to a wall without the base
and stand.
384 mm
Metal screw holes
For attaching to speaker stands
Speaker stand
(not included)
1 Insert the
cable from
the bottom.
Center speaker
190 mm
Surround speaker