Cleaning The Flushing Tray - MIMAKI UJV-160 Daily Care Manual

Cleaning the flushing tray

Replace the flushing filter in the flushing tray once a month.
Contents of the
cleaning kit
• When replacing, be sure to put on the supplied goggles and gloves, since you may get ink in
your eyes.
• Replace the flushing filter (waste ink absorber) about once a month. If it absorbed more than
its capacity, ink may overflow.
1
Turn the power OFF with the power
switch.
2
Move the carriage to the right.
• Move the carriage with the
3
Remove the flushing tray on the left of
this machine.
• Lift it up to remove.
4
Replace the filter in the flushing tray
with a new one.
6
• F-200 Cleaning • Flushing filter
kit (SPC-0568)
• Gloves
keys.
(SPC-0577)
• Paper towel • Goggles
Power switch
Carriage