Table of Contents
Advertisement
Other Settings
[DVD-A] (Motion picture part) [DVD-VR] [DVD-V]
To change play speed
– from "k0.6" to "k1.4"
≥ Press [1 PLAY] to return to normal play.
≥ After you change the speed
– Dolby Pro Logic II and Sound Enhancement have
Play Speed
no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to
48 kHz.
≥ This function may not work depending on the disc's
recording.
∫ Play Menu
This works only when the elapsed play time can be displayed. It also
works with all JPEG content.
[DVD-VR]: Program>All>Off
≥ During playlist play: Scene>Playlist>Off
[DVD-A]: Track>Group
[DVD-V]: Chapter>Title
[VCD] [CD]: Track>All>Off
Repeat
[WMA] [MP3] [MPEG4] [DivX]: Content>Group
[JPEG]: Group
§
§
"All" is displayed during all group ([DVD-A]), program
or random play.
Except [JPEG] [DVD-VR] (Still picture part) [MPEG4] [DivX]
To repeat a specified section
A-B Repeat
Press [ENTER] at the starting and ending points.
Press [ENTER] again to cancel.
Except [DVD-VR]
To mark up to 5 positions to play again
Press [ENTER] (The unit is now ready to accept
markers.)
To mark a position:
Press [ENTER] (at the desired point).
To mark another position:
Press [2, 1] to select "¢" ➜ Press [ENTER].
Marker
To recall a marker:
Press [2, 1] ➜ Press [ENTER].
To erase a marker:
Press [2, 1] ➜ Press [CANCEL].
≥ This feature does not work during program and
random play.
≥ Markers you add are cleared when you open the disc
tray or switch the unit to standby.
[DVD-VR] (Except still picture part)
[DVD-V] (Except iR/iRW)
Allows you to browse the disc contents and start
playing from the selected position. You can select
either "Intro Mode" or "Interval Mode" in "Advanced
Disc Review" in the "Disc" tab (➜ page 23).
Advanced
Disc Review
When you find a title/program to play
Press [1 PLAY].
≥ This may not work depending on the disc and the
play position.
≥ [DVD-VR] This does not work when playing a playlist
(➜ page 18).
>Off
§
>Off
§
>Off
§
>Off
Items shown differ depending on the type of disc.
∫ Picture Menu
Normal
Cinema1:
Mellows images and enhances detail in
dark scenes.
Cinema2:
Sharpens images and enhances detail in
dark scenes.
Animation: Suitable for animation.
Dynamic:
Enhances the contrast for powerful
images.
User:
Press [ENTER] to select "Picture
Adjustment" (➜ below).
Picture
Picture Adjustment
Mode
Contrast:
Increases the contrast between light and
dark parts of the picture.
Brightness: Brightens the picture.
Sharpness: Adjusts the sharpness of the edges of
horizontal lines.
Colour (or Color): Adjusts the shade of the picture's
Gamma:
Adjusts the brightness of dark parts.
Depth Enhancer: Reduces the rough noise in the
To select suitable picture quality with your television
§
480p/576p (progressive)
§
480i/576i (interlace)
Video
When you select "xxx
Output
confirmation screen appears, select "Yes" only if
connecting to a progressive output compatible
Mode
television.
§
The numbers displayed depend on the disc being
played. One of the above numbers is displayed.
If you have chosen "xxx
select the method of conversion for progressive output
to suit the type of material.
≥ The setting will return to Auto or Auto1 when the disc
tray is opened, the unit is turned off or another source
is selected.
When playing PAL discs, MPEG4 or DivX video
contents
Auto:
Automatically detects the film and video
content, and appropriately converts it.
Video:
Select when using Auto, and the content is
distorted.
Cinema: Select this if the edges of
Transfer
the film content appear
Mode
jagged or rough when Auto
is selected.
However, if the video
content is distorted as shown in the
illustration to the right, then select Auto.
When playing NTSC discs
Auto1: Automatically detects the film and video
content, and appropriately converts it.
Auto2: In addition to Auto1, automatically detects film
contents with different frame rates and
appropriately converts it.
Video: Select when using Auto1 and Auto2, and the
content is distorted.
When you select "Auto" the constructing method of the
DivX contents is automatically distinguished and
Source
output. If the picture is distorted, select "I (Interlace)" or
Select
"P (Progressive)" depending on which constructing
method was used when the contents were recorded to
[DivX]
disc.
Auto, I (Interlace), P (Progressive)
color.
background to give a greater
feeling of depth.
§
p" (progressive) and a
§
p" (progressive) (➜ above),
(Continued on next page)
21
Hide quick links:
Advertisement
Table of Contents
