Panasonic SC-HT545 Operating Instructions Manual page 24

QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Video" tab
TV Aspect
Choose the setting to suit your
television and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with a Plasma
display, adjust if you notice the audio is
out of sync with the video.
Video Out (AV/Component)
Choose the video signal format to be
output from the SCART (AV) and
Component terminal.
Still Mode
Specify the type of picture shown
when paused.
NTSC Disc Output
Choose PAL 60 or NTSC output when
playing NTSC discs (➜ page 12,
Video systems).
Picture/Video Output
Change the video signal format to be
output for JPEG, MPEG4 and DivX
video if picture output is not smooth
during playback.
∫ "Audio" tab
Dynamic Range Compression
Speaker Settings (➜ page 25)
Set the delay time for your center and
surround speakers.
∫ "Display" tab
Menu Language
On-Screen Messages
Background during Play
Select background during JPEG,
MPEG4 and DivX video playback.
∫ "Others" tab
FL Dimmer
Change the brightness of the unit's
display.
DivX Registration
Display the unit's registration code.
QUICK SETUP
Re-initialise Setting
Return all values in the Setup menus
to the default settings.
§5
Refer to "Frame still and field still" (➜ page 13, Glossary).
24
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
≥ Standard (Direct View TV)
≥ Projection TV
≥ 0ms ≥ 20ms
≥ Video/YPbPr
§
6
≥ RGB/No Output
≥ Automatic
≥ Field
§5
: The picture is not blurred, but picture quality is lower.
≥ Frame
§5
: Overall quality is high, but the picture may appear blurred.
≥ PAL60: When connected to a PAL television.
≥ NTSC:
When connected to an NTSC television.
≥ Automatic ≥ PAL
≥ NTSC/PAL60:
Output will depend on "NTSC Disc Output" setting (➜ above).
≥ Off
≥ On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level
and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
≥ Center:
0.0/1.0/2.0/3.0/4.0/5.0 ms
≥ Surround (L/R):
0.0/5.0/10.0/15.0 ms
≥ English ≥ Français
§6
≥ English ≥ Français
§7
≥ On ≥ Off
≥ Black ≥ Grey
≥ Bright ≥ Dim
≥ Auto: The display is dimmed, but brightens when you perform some operations.
You need this registration code to purchase and play DivX Video-on-Demand (VOD) content (➜ page 32,
About DivX VOD content).
≥ Yes ≥ No
≥ Yes: The password screen is shown if "Ratings" (➜ page 23) is set. Please enter the same password.
After "INIT" on the display disappears, turn the unit off and on again.
≥ No
≥ CRT Projector
≥ Plasma TV
≥ 40ms ≥ 60ms
≥ S-Video/YPbPr
≥ Deutsch ≥Italiano ≥ Español
≥ Deutsch ≥Italiano ≥ Español
[Continental]Europe]
§6
≥ LCD TV/Projector
≥ 80ms ≥ 100ms
≥ Polski ≥ Svenska ≥ Nederlands
≥ Português ≥ Русский ≥ Nederlands
[Australia[and[N.Z.\
§7