Audio And Video Connections; Basic Audio Connection; Basic Video Connection - Panasonic SC-HT545 Operating Instructions Manual

4

Audio and video connections

STEP
≥ Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
≥ Turn the television off before connecting, and refer to the television's operating instructions.

Basic audio connection

Television (not included)
RF IN
AUDIO AUDIO
OUT IN
L
R
VIDEO OUT VIDEO IN
≥ This audio connection will enable you to play audio from your
television through your home theater system. Refer to "Operating other
equipment" (➜ page 31).
Other video connections for improved picture quality
COMPONENT VIDEO OUT
Television
(not included)
Video cables
(not included)
COMPONENT
VIDEO IN
P
B
P
R
Y
To enjoy progressive video
≥ Connect to a progressive output compatible television.
≥ Set "Video Output Mode" to "480p" or "576p", and then follow the instructions on the menu screen (➜ page 21, Picture Menu).
[Continental]Europe]
≥ Panasonic televisions with 625 (576)/50i·50p, 525 (480)/60i·60p input terminals are progressive compatible. Consult the manufacturer if you
have another brand of television.
8
Back of the main unit
COMPONENT VIDEO OUT
L
P
B
R
P
R
AUX AUX
Audio cable
(not included)
Back of the
main unit
COMPONENT VIDEO OUT

Basic video connection

Television (not included)
RF IN
AUDIO
OUT
Y
L
R
VIDEO
S-VIDEO
OUT
OUT
VIDEO OUT
≥ Refer also to "Other video connections for improved picture quality"
(➜ below).
≥ Using the COMPONENT VIDEO OUT terminals
The COMPONENT VIDEO OUT terminals provides a purer picture than
the S-VIDEO OUT terminal. These terminals can be used for either
interlaced or progressive output. Connection using these terminals
outputs the color difference signals (P
separately in order to achieve high fidelity in reproducing colors.
Y
≥ The description of the component video input terminals depends on
P
B
the television or monitor (e.g. Y/P
to terminals of the same color.
P
R
VIDEO S-VIDEO
OUT OUT
[Continental]Europe]
≥ When making this connection, select "Video/YPbPr" or "S-Video/
YPbPr" from QUICK SETUP (➜ page 10). If "RGB/No Output" is
selected, the RGB signal is output from the SCART (AV) terminal, but
no signal is output from the component video output terminals.
Video cable
Back of the main unit
AUDIO
IN
L
R
VIDEO IN
Video cable (included)
/P ) and luminance signal (Y)
B R
/P , Y/B-Y/R-Y, Y/C
B R
COMPONENT VIDEO OUT
Y
P
B
P
VIDEO VIDEO
R
S-VIDEO
AUX AUX
OUT OUT
OUT
/C ). Connect
B R