Table of Contents
Advertisement
Chapter 4. Web Interface Configuration
Step 1: General
Change Password
Enter the administrator's New Password in the New Password field and retype it again in the Verify Password
field. (Note: The maximum length of the password is twenty-character and no space is allowed.) To secure the
system, changing the administration account password is recommended. Next, select a proper time zone from
the Time Zone drop-down menu to set the system time. Click Next to continue.
Step 2: WAN1 Interface
Select the Connection Type for WAN1 Port
Select an Internet connection type for WAN1 interface. Contact your ISP or the network administrator to make
sure the connection type for WAN1. There are three connection types provided by DSA-3600: Static, Dynamic
and PPPoE. Enter the Username and Password provided by the ISP. Click Next to continue, or click Back to
change configurations in previous step.
Dynamic IP Address
If this option is selected, an appropriate IP address and related information will be assigned automatically.
Click Next to continue.
Static IP Address: Set WAN1 Port's Static IP Address
Enter the IP Address, Subnet Mask and Default Gateway provided by the ISP.
Click Next to continue.
90
Advertisement
Table of Contents
