Table of Contents
Advertisement
Chapter 4. Web Interface Configuration
PPTP: Point to Point Tunneling Protocol is a service that applies to broadband connection used mainly in
Europe and Israel. Select Static to specify the IP address of the PPTP Client manually or select DHCP to get the
IP address automatically. The fields with red asterisks are required to be filled in. There is a Dial on Demand
function under PPTP. If this function is enabled, a Maximum Idle Time can be set. When the idle time is
reached, the system will automatically disconnect itself.
Select the option when PPTP (Point to Point Tunneling Protocol) is the connection protocol provided by the
network service providers. When Dial on Demand is enabled, there is a Maximum Idle Time available. The
system will disconnect itself from the Internet automatically when the Maximum Idle Time is reached.
15
Advertisement
Table of Contents
