HP t630 Thin Client Troubleshooting Manual page 55

12. Select File > Apply Defaults and Exit.
13. Shut down the computer, remove AC power cord, and then place the (blue/green) jumper back on header
E49. Replace the computer hood and power cord.
Model Description
System Boot ROM
(BIOS)
System memory
(RAM)
RTC (CMOS) RAM
Keyboard/mouse
t630
(ROM)
Keyboard/mouse
(RAM)
LOM EEPROM
TPM
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
If you require additional information or need assistance please contact James Smalls at 281-927-7489.
Location/Size Power
SPI ROM (64 Mbit)
socketed,
removable.
SODIMM socket. Main power
Removable
(4GB/8GB/16GB)
RTC RAM is 272- Main/battery
byte RAM Memory in
AMD embedded
System on Chip
(SoC)).
2k bytes embedded Main
in the super I/O
controller (SIO12)
256 bytes Main
embedded in the
super I/O controller
(SIO12)
256 bytes Aux
embedded in LAN
Chip
6 kBytes embedded Main
in TPM Chip. It's ROM
for TCG Firmware
Loss of data Comments
If main power is Only S0/S3/S5/G3
removed ACPI states are
supported
If battery power is
removed
If main power is
removed
One Time
programmable
memory (OTP)
49