Agilent Technologies U1273A Quick Start Manual page 16

U1273A/U1273AX Handheld Digital Multimeter
Check the Fuse
• To check Fuse 1: Ensure that the probe tip is touching the
NO TE
top half metal contact inside the µA mA terminal.
• To check Fuse 2: Ensure that the probe tip is touching the
left half metal contact inside the A terminal.
The multimeter will sound an input warning alert if the probe
tip is in contact with any other sides of the µA mA or A termi-
nal other than the sides specified in the instructions above.
16 U1273A/U1273AX Quick Start Guide