Basic Operations
Making Calls
Intercom Calls
Note:
Handover:
Even if you move during a conversation, the linking CS is automatically
switched without disconnecting the call.
Handover is available only during a conversation (except a conference call).
It is not available when the switched CS is busy or there is no CS in the
moving range.
Make sure the Power Switch is set to ON ( ) and " " is displayed.
1
Press
(Talk) or
(Intercom).
2
Enter the extension number.
• The dialed number is displayed.
• If you misdial, press
enter the number again.
3
Talk after the called party answers.
Press
(Cancel) after the conversa-
4
C
tion is finished.
– Predialing is also possible. In this case, reverse steps 1 and 2.
– If you misdial while predialing, press
from the last one, and enter the number again.
– You can also finish the conversation by placing the PS on the Charger
or pressing
– If " " flashes, move towards the Cell Station and try again.
INT'
(Flash) and
CLR
(Talk).
201
(Clear) to clear each digit
201
13