Panasonic KX-TD1232CE User Manual Addendum page 45

PS Programming
Prog.
The possible programming items and their password levels and
displays are shown below in the order they are displayed.
Setting the Keypad Backlight Mode (Level 0)
You can turn off the keypad lights to save
electricity.
(Default: ON)
Setting the Key Tone (Level 0)
You can select whether the button on your
PS sounds a tone or not. If "ON" is
selected, a key tone will be heard when
you press a button (except during the PBX
Programming mode).
(Default: ON)
Selecting the Ringer Pattern (Level 0)
You can select the PS ringer pattern (6
patterns).
(Default: Ringer 1)
Selecting the Vibration and Ring Type (Level 0)
You can select the vibration and ring type;
off, vibrate and ring simultaneously
(RING & VIB), or vibrate for nine sec-
onds and then ring (VIB
(Default: OFF)
This program can be set in combination with the VOLUME
Control button adjustment (page 11) as shown below.
OFF
RINGER
PS
RING & VIB
RINGER and VIB†
VIB RING
VIB for 9 sec and then RINGER
RING).
VOLUME Control Button Adjustment
RINGER (1 – 7)
†: Battery life may decrease faster than the other settings.
BACKLIGHT
= ON
KEY TONE
= ON
RING PATTERN
= 1
VIBRATION & RING
= OFF
RINGER OFF VIBRATION
OFF VIB
VIB VIB
VIB for 9 sec VIB
45