Panasonic KX-TD1232CE User Manual Addendum page 14

Basic Operations
Outside Calls
Line Access, Automatic / CO line group
Note:
14
There are three types of line access methods as follows:
1) Line Access, Automatic: selects an idle CO line.
2) Line Access, CO Line Group: selects an idle CO line in the
3) Line Access, Individual: selects a specific CO line.
Make sure the Power Switch is set to ON ( ) and " " is displayed.
Press (Talk).
1
2 Enter the line access code.
– 9
– 81 through 88 : CO Line Group
3
Enter the phone number.
• The dialed number is displayed.
• The display starts counting the call
duration (or charge, if programmed).
• If you misdial, press
enter the number again.
4
Talk after the called party answers.
5
Press C (Cancel) after the conver-
sation is finished.
– Predialing is also possible. In this case, press
after entering the phone number (steps 2 and 3).
– You can also finish the conversation by placing the PS on the Charger
or pressing
– If " " flashes, move towards the Cell Station and try again.
desired CO line group.
: Automatic
(Flash) and
(Talk).
01234567
CO01 0:01'15
(Talk) (step 1)