Removing The Power Supply - Cisco AS5200-PWR-AC Replacement Manual

Removing the Power Supply

Take these steps:
Step 1
Figure 4
Step 2
Figure 5
Mounting
screws
Power
supply
Step 3
Place the access server so that the rear panel is facing you.
Cisco AS5200 Access Server Rear Panel
Remove the two mounting screws that secure the power supply to the chassis and set them
aside.
Removing the Mounting Screws
Although the illustrations in this document show the AC power supply, the
Note
procedures are the same for the DC power supply.
Now turn the access server so that the front panel is facing you.
Replacing the Power Supply in Cisco AS5200 Universal Access Servers
Removing the Power Supply
7