Cisco AS5200-PWR-AC Replacement Manual page 9

Figure 7 Disconnecting the Power Connector
Power supply
11-pin
connector
Slide the power supply slightly toward the front of the chassis. This disengages the
Step 6
built-in hook that helps secure the power supply to the chassis.
Figure 8 Removing the Power Supply
Lift the power supply out of the chassis. If you want to preserve the power supply, put it
Step 7
in an antistatic bag.
Power supply
Hook
Replacing the Power Supply in Cisco AS5200 Universal Access Servers
Removing the Power Supply
9