Component Identification - HPE 6Gb SAS BL User Manual

2 Component identification

1 Unit ID LED
2 Health LED
3 Locking latch handle
4 Link LED
5 Fault LED
6 SAS ports (to external devices)
8 Component identification
Blue
Off—Normal
Solid —Being identified
Blinking—Firmware is being updated
Green
Off—Not powered up
Solid green—Healthy
Amber
Off—Not powered up
Blinking—Error, there is a problem with the switch
Green
Off—No link between the server and storage
Solid —Link between server and storage is established
Steady blink (1Hz)—Switch hardware or software is starting
up. During this time, access to the switch and its VSM software
is restricted, and server blades with SAS controller cards
mapped to the switch interconnect bay will be restricted from
starting up.
Flickering blink—Activity on the established link
Amber
Off—Normal
On—Link error, there is a problem with the port