Advertisement
Installation
1. Connect the handset and cord then, connect it to the main body.
2. Connect phone to the router using Ethernet cable.
3. Connect AC power cord to the phone and plug to a power supply. This will boot the
phone, which may take a few minutes.
BudgeTone – 100 VoIP phone uses Agile Phone biz Pro services. This phone requires an
Internet service provider or broadband modem.
1. Main Screen
2. Menu Arrow
3. Callers
4. Speaker
13. Send
1. Main Screen: Displays phone settings and functions.
↓↑
2. Menu Arrow [
3. Callers: After off hook, press [Callers] to display the incoming Caller IDs. When number is
displayed, press [Send] to make a call using the displayed number.
4. Speakerphone: Activate hands-free mode.
5. Menu: Displays phone options and features.
6. Called: After off hook, press [Called] to display dialed numbers. When number is displayed,
press [Send] to make a call using the displayed number.
7. Message: Retrieves voicemail portal or service.
8. Hold: Temporarily holds an active call.
9. Transfer: Transfers an active call to another party.
10. Conference: Enables a 3-way call.
11. Flash: Press [Flash] to switch between two lines.
12. Mute/Del: Mutes an active call; or deletes key entry, call log, etc.
13. Send/ (Re) dial: Redials the last number dialed. After entering a phone number, press [Send]
to disconnect a call.
BudgeTone – 100 Parts & Functions
]: Used to navigate.
5. Menu
6. Called
7. Message
8. Hold
9. Transfer
10. Conference
11. Flash
12. Mute/Del
2
Advertisement
