Preparing For Installation; Safety Recommendations; Examining The Installation Site - HP officeconnect 1910 series Getting Started Manual

Preparing for installation

The HPE OfficeConnect 1910 Switch Series includes the models listed in
Table 1 HPE OfficeConnect 1910 Switch Series models
Product code
Non-PoE
JG536A
JG538A
JG540A
PoE
JG537A
JG539A
IMPORTANT:
For regulatory identification purposes, the switches are assigned Regulatory Model Numbers
(RMNs). The RMNs should not be confused with the marketing name HPE 1910, or the product
codes.

Safety recommendations

To avoid any equipment damage or bodily injury, read the following safety recommendations before
installation. The recommendations do not cover every possible hazardous condition.
•
To avoid damage to the electrolytic capacitor in the switch, do not store the switch without
power for more than one year.
•
Before cleaning the switch, remove all power cords from the switch. Do not clean the switch
with a wet cloth or liquid.
•
Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
•
Do not place the switch on an unstable case or desk. The switch might be severely damaged in
case of a fall.
•
Ensure good ventilation of the equipment room and keep the air inlet and outlet vents of the
switch free of obstruction.
•
Make sure the operating voltage is in the required range.
•
To avoid electrical shocks, do not open the chassis while the switch is operating or when the
switch is just powered off.
•
The accessories shipped with the switch, including but not limited to power cables, are intended
only for the switch. Please do not use them for other products.

Examining the installation site

The switches must be used indoors. You can mount your switch in a rack or on a workbench, but
make sure:
•
A minimum clearance of 5 cm (1.97 in) is reserved at the air inlet and exhaust vents for
ventilation.
HPE description
HPE OfficeConnect 1910 8 Switch
HPE OfficeConnect 1910 24 Switch
HPE OfficeConnect 1910 48 Switch
HPE OfficeConnect 1910 8 PoE+ Switch
HPE OfficeConnect 1910 24 PoE+ Switch
Alias
HPE 1910 8
HPE 1910 24
HPE 1910 48
HPE 1910 8 PoE+
HPE 1910 24 PoE+
1
Table 1.
RMN
HNGZA-HA0001
HNGZA-HA0003
HNGZA-HA0005
HNGZA-HA0002
HNGZA-HA0004