•
Routing Information Protocol (RIP) - provides RIPv1 and RIPv2
routing
•
OSPF - provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
•
Policy-based routing - uses a classifier to select traffic that can be
forwarded based on policy set by the network administrator.
•
Border Gateway Protocol (BGP) - provides IPv4 Border Gateway
Protocol routing, which is scalable, robust, and flexible
■
Support for many other advanced features to enhance network perfor-
mance, security, and control - for a description, see the Management and
Configuration Guide which is on the HP networking Web site.
Support for IEEE 802.3af standard, IEEE 802.3at standard, and
■
pre-standard PoE devices.
■
Supports dual management module capability.
Supports 100% POE+ capacity at low line
■
■
Supports existing v2 zl and v3 zl2 modules
■
Support for three new Power Supplies
•
BPSU (Base Power Supply unit - J9828A): Lower cost alternative
•
LPSU (Low Power Supply unit - J9829A)
–
Dual-output 12V and 54V, with one C16 power receptacle
–
For support of mid-range POE/POE+ installations
•
HPSU (High Power Supply Unit - J9830A)
–
Dual-output 12V and 54V, with two C20 power receptacle
–
For support of maximum POE/POE+ installations
■
Support for Trusted Platform Module (TPM) subsystem for storing certif-
icates and secure identity
Introducing the HP 5400R zl2 Switches
Switch Features
1-25