SPORTS ART 805p Owner's Manual page 24

2. If you turn on the POWER switch and the switch is lit, but there is no display,
please contact your dealer for more information.
(B) ERROR 7 MESSAGE: STRIDE ADJUSTMENT MALFUNCTION
ERROR 7 is a self diagnostic code to alert you to a problem with the electronic stride
adjustment mechanism.
1. If you turn on the unit and ERR 7 appears on the display.
2. When you are using the STRIDE
adjustment does not work, and ERR7 appears on the display.
Please contact your dealer immediately, and DO NOT use the unit, as the stride
adjustment mechanism is damaged and must be repaired or replaced.
Caution: If ERR 7 appears and blinks for couple seconds then the display returns to
normal, OR you press the STRIDE
ERR 7 appears and blinks, please contact your dealer for further
information because the stride system is damaged and should not be used.
(C). IF THE LOAD DOES NOT RESPOND PROPERLY:
If there is no load or the load does not respond properly when you press the LEVEL
keys, please contact your dealer for further details.
(D). NO SPM READING:
If your display has no SPM reading during your workout, please contact your dealer
for more details.
Cautions: Do not attempt to repair or service the Sports Art 805P elliptical trainer,
PDF created with pdfFactory trial version
unless you are a factory authorized service professional. Such an attempt
will automatically void the factory warranty.
www.pdffactory.com
▲▼
keys to adjust the stride length, the stride
▲▼
keys to adjust the stride length and