Reset; Key Functions (Definitions) - SPORTS ART 805p Owner's Manual

RESET

1. TO STOP: When you are in STRIDE motion, press RESET to stop motor.
2. TO CLEAR ALL DATA: Press the RESET key to clear all data and return to the

KEY FUNCTIONS (definitions):

SCAN: Press the MODE key until SCAN appears, and the display will automatically
alternate between TIME, STEPS, CAL and PULSE.
TIME: Use the
key changes the time in increments of 1 minute. Pressing and holding the key
will change the display by 5 minutes every 0.5 seconds. When you have
reached your desired time, press ENTER.
During your workout, the electronics package will count down, and then beep for 1.5
seconds when your desired time is reached. If your workout continues, the unit will
start to count up.
STEPS: Use the
the steps in increments of 5 steps. Pressing and holding the key will change
the display by 50 steps every 0.5 seconds. When you have reached your
desired steps, press ENTER.
During your workout, the electronics package will count down, and then beep for 1.5
seconds when your desired steps have been reached. If your workout continues, the
unit will start to count up.
CAL.: This readout gives you the amount of calories burned, based on the weight
you entered and the steps during your workout.
SPM: This readout displays the steps per minute.
STRIDE: The stride length range is 450 mm ~ 650 mm (17" ~ 26"). Press the
PDF created with pdfFactory trial version
MAN'L mode.
▲▼
keys to set the desired time of your workout. Each press of the
▲▼
keys to set your desired steps. Each press of the key changes
▲▼
STRIDE keys to adjust the stride length.
www.pdffactory.com