How To Use The Remote - International comfort products DLFBHF09K1A Owner's Manual

How to use the remote control to operate the unit
1
ON/OFF :
Press this button to turn on the unit .Press this button again to turn off the unit.
2
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly
decreases set temperature. In AUTO mode, set temperature is not adjustable.
+
:
3
Press this button to increase set temperature.Holding it down above 2 seconds rapidly
increases set temperature. In AUTO mode, set temperature is not adjustable.
4 MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO,
COOL,DRY, FAN,and HEAT
AUTO COOL
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not
be displayed on the LED of the indoor, and the unit will automatically select the suitable operation
mode in accordance with the room temperature to make indoor room comfortable.
5
FAN
:
This button is used for setting Fan Speed in the sequence that goes from AUTO,
, ,
Auto
Low speed
6
SWING:
Press this button to set up &down swing angle, which circularly changes as below:
This remote controller is universal . If any command
the unit will carry out the command as
indicates the guide louver swings as:
7 I FEEL:
Press this button to turn on I FEEL function. The unit automatically adjust temperature
according to the sensed temperature. Press this button again to cancel I FEEL function.
421 02 9260 00
Remote Controller Description
, as the following:
*
*
FAN HEAT
DRY
,
then back to Auto.
to
Low-Medium speed
Medium-High speed
OFF
Specifications are subject to change without notice.
*Note:Only for models with heating function.
High speed
, or
OPERATION INSTRUCTIONS
,
Medium speed
is sent out,
6