Maintenance
Before inspection and maintenance of the unit. PLEASE set power switch to "OFF" to cut off the
power supply.
Units
3.1
Indoor unit, Outdoor unit and Remote controller
1. Wipe them with dry soft cloth.
Front panel
1.
Open the front panel.
Slide the two stoppers on the left and right sides inward until they click.
2. Remove the front panel.
Allowing the front panel to fall forward will enable you to remove it.
3. Clean the front panel.
it up in the shade after washing.
4. Attach the front panel.
Attach the string to the right, inner-side of the front grille.
CAUTION
Filters
3.2
1.
Open the front panel.
2. Remove the air filter.
pull upward.
3. Take off the Titanium Apatite Photocatalytic Air-Purifying
Filter.
421 02 9260 00
r.
r,dry it with cloth, dry
y.
104℉(40℃)
Specifications are subject to change without notice.
Place front
panel in
grooves.
, then
OPERATION INSTRUCTIONS
String
String
10