Admin - D-Link DIR-879 User Manual

Section 4 - Configuration - Extender Mode
This page will allow you to change the administrator (Admin) password and
enable remote management. In the Management menu on the bar on the top
of the page, click Admin. To load, save, reset settings, or reboot the router, click
System and refer to System on page 110.
Admin Password
Password: Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enable Graphical
Enables a challenge-response test to require users to type letters or
Authentication numbers from a distorted image displayed on the screen to prevent
(CAPTCHA):
online hackers and unauthorized users from gaining access to your
router's network settings.
Advanced Settings - Administration
Enable HTTPS Check to enable HTTPS to connect to the router securely. Instead of using
Server: http://dlinkrouter.local./, you must use https://dlinkrouter.local./ in
order to connect to the router.
Click Save when you are done.
D-Link DIR-879 User Manual

Admin

109