D-Link DIR-879 User Manual page 21

Section 3 - Installation - Router
7. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately
one minute until the LED indicator on the front of the device changes from orange to solid white.
Note: This unit is to be used with power supply model DA-60N12.
8. If you are configuring the DIR-879 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi
Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label attached to the
bottom your router.
Wi-Fi Configuration Note
If you are configuring the DIR-879 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable
into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
9. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already.
Try opening a web browser and connecting to a website. If the website does not load, proceed to Completing Setup
on page 18.
D-Link DIR-879 User Manual
DIR-879
DIR-879
Modem
Modem
DIR-879
Modem
17