Wizard - D-Link DIR-879 User Manual

Section 4 - Installation - Wireless Extender
Connect to an Uplink Network using the Setup Wizard
4. Press the power button, and wait approximately one minute.
5. If you are configuring the DIR-879 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi
Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label attached to the
bottom your router.
Internet Broadband Connection Device
(e.g. DSL/Cable Modem)
If you are configuring the DIR-879 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable
into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
Internet Broadband Connection Device
D-Link DIR-879 User Manual
Existing Router
Existing Router
(e.g. DSL/Cable Modem)
DIR-879
DIR-879
DIR-879
Wi-Fi Configuration Note
31