Test Equipment - Motorola M11URD6CB1_N Service Manual

Test Equipment

The list in Table 3-1 includes all standard test equipment required for servicing two-way mobile radios. Battery-
operated test equipment is recommended when available. The "Characteristics" column is included so that equiv-
alent equipment may be substituted; however, when no information is provided in this column, the specific Motor-
ola model listed is either a unique item or no substitution is recommended.
Model No.
R2000 Series
with trunking
option
R1053
FLUKE 8012
T1013A
S1339A
R1011B
June, 2000
Table 3-1. Recommended Test Equipment
Description
Communications
System Analyzer
Dual Trace 200 MHz bandwidth,
Oscilloscope 5 mV/cm -20 Mv/cm
Digital Multimeter
Load resistor 0-1000MHz, 300 W
RF Millivolt Meter 100 V to 3V rf
10kHz to 1.2 GHz
DC Power Supply 0-40Vdc, 30 Amps
6880905Z99-O
Service Aids, and Tools
Characteristics
Frequency/deviation meter and
signal generator for wide-range
troubleshooting and alignment
For waveform measurements
AC/DC voltage and current meter
For use with wattmeter
RF level measurements
Bench supply for 13.8Vdc current
limited
Section 3
Test Equipment,
Application
3-1