Event triggered
recording controlled
by motion detection
5.2 Log file
Vista SmartDisc 02
This mode triggers event recording with integrated motion detection with
adjustable sensitivity and definable detection areas.
This pre-alarm sequence
is recorded
Motion is detected
Start
Interval
Pre-alarm
Illustration: Event recording triggered by integrated motion detection
SmartDisc
02 protocols, important device states and events in a log file with
a capacity of up to 1,000 entries. The oldest entries will be overwritten
automatically according to First In First
disk. It can by displayed by SmartControl and SmartControl
in online mode, or also in offline mode by Smart Player
file entries are system entries and as such beyond the control of the user.
Other messages are optional and must be defined with SmartControl or
SmartControl PRO software with menu Extras in Site
below these messages are marked yes in column Optional. Critical messages
are indirectly connected to the error relay and marked yes in column Error
relay.
Column Log file
entry provides the text messages and optional additional
information indicated by square brackets. Additional information date and
time apply to all entries. Therefore each Log file entry
all other additional information, letters (e.g. [x]) are used, which are explained
in column Description.
5 Description of "Site archive" features
This post-alarm sequence
This pre-alarm sequence
is recorded
Motion is detected
Alarm picture
Interval
Interval
Post-alarm
Out. The file is stored on the hard
This post-alarm sequence
is recorded
is recorded
Alarm picture
Start
Interval
Pre-alarm
Post-alarm
PRO software
software. Certain log
archive. In the table
starts with [D&T]. For
41