Meter Display - Acon ON-CALL PRO User Manual

Meter Display

Test Result
Blood Drop/
Strip Symbol
Control Solution
Symbol
Test Result Area: Indicates test result.
Blood Drop / Strip Symbol: Wait for the Blood Drop / Strip Symbol to appear
before applying the sample. These two symbols appear at the same time.
Control Solution Symbol: Indicates a control test result. A pound sign (#) will
also be displayed when control solution symbol appears.
MEM: Shows a test result stored in memory.
Ketone?: Appears when the blood glucose concentration is above 300 mg/dL.
This simply suggests that a ketone test is recommended. Follow your
institution's procedures for ketone testing.
Note: This symbol does not mean that the system has detected ketones.
It recommends that a ketone test should be taken.
Hypo Symbol: Appears when the blood glucose concentration is below the
"Hypoglycemia" (low blood sugar) target level that you have set.
Hyper Symbol: Appears when the blood glucose concentration is above the
"Hyperglycemia" (high blood sugar) target level that you have set.
Measurement Unit: Only mg/dL will be displayed on the meter. It cannot
be adjusted.
Battery Symbol: Warns when you should replace the battery.
After Meal Symbol: Appears when after-meal test results are displayed.
Before Meal Symbol: Appears when before-meal test results are displayed.
Test Reminder Symbol: Appears when reminding you to test blood glucose.
Pound Sign (#): Appears with the control solution test result or when you mark
an invalid result to prevent it from being included in the average.
6
Month Day
Area
Memory Ketone
Hour Minutes
Hypo Symbol
Pound Sign (#)
Test Reminder Symbol
Before Meal Symbol
After Meal Symbol
Battery Symbol
Measurement Unit
Hyper Symbol