Bosch AHS 41 ACCU Operating Instrucctions page 12

Hide thumbs Also See for AHS 41 ACCU:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
2 609 932 402 - GB Seite 2 Dienstag, 13. April 2004 4:05 16
Product Specification
Hedgecutter
Part number (TYP)
No-load stroke rate
Cutting length
Cutting width
Weight
Battery type
Voltage
Battery rating
Number of batteries
Run time per battery
Charging time
Battery charger
Charging current
Allowable charging temperature range
Intended Use
The product is intended for cutting and trimming
hedges and bushes in domestic use.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your hedgecutter. It is impor-
tant that you read these instructions carefully.
Delivered Items
Carefully remove the machine from its packaging
and check for complete contents:
– Hedgecutter
– Blade guard
– Operating instructions
– Battery (AHS 52 Accu 2x)
– Battery charger
When parts are missing or damaged, please contact your
dealer.
Operating Controls
1 Cutting blade
2 Front handle guard
3 Front handle switch lever
4 Rear handle with switch lever
5 Battery
6 Ventilation slots
7 Blade guard
8 Battery charger
12 • 2 609 932 402 • TMS • 13.04.04
AHS 41 Accu
0 600 839 1..
[spm]
1 100
[mm]
410
[mm]
15
[kg]
2.5
NiCd
[V]
14.4
[Ah]
1.5
1
[min]
50
[h]
3 – 4
AL 1404
[A]
0.4
[°C]
0 – 45
9 Charging compartment
10 LED
11 Mains plug
12 Serial Number
13 Battery unlocking button
Not all of the accessories illustrated or described are
included as standard delivery.
For Your Safety
Warning! Switch off, remove battery from ma-
chine before adjusting or cleaning.
The blades continue to move for a few frac-
tions of a seconds after the hedgecutter is
switched off. Caution! Do not touch the mov-
ing blades.
Charging Procedure
The charging procedure starts as soon as the mains
plug 11 is plugged into the socket and the battery 5
is inserted into the charging compartment 9 .
The green LED 10 is not a charge control indica-
tor! When the green LED is lit, it indicates that a
charging current flows.
After the end of the charging process (approx. 3 h–
4 h), pull the mains plug of the battery charger from
the socket and remove the battery.
A temperature increase of the battery indicates that
it is fully charged.
Charging Advice
With continuous or several repetitive charging cy-
cles without interruption, the charger can warm up.
This is not harmful and does not indicate a technical
defect of the unit.
English - 2
AHS 52 Accu
0 600 839 4..
1 100
520
15
2.6
NiCd
14.4
1.5
2
50
3 – 4
AL 1404
0.4
0 – 45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ahs 52 accu

Table of Contents