FujiFilm FinePix S3Pro Service Manual page 70

4. Adjustments
<Step 7>
USB_ID writing
Selected USA.
Press the [Enter] key!
—> The [FinePix S3Pro Adjustment End] screen appears.
<Step 8>
FinePix S3Pro Adjustment completed.
1) Remove USB cable from the camera.
2) Press the [Enter] key.
--> The adjustment software returns to the Jig mode setup screen
after press the [Enter] key.
--> The display returns to the [Jig Mode Setup Screen] after pressing the [Enter] key on the computer.
--> End on the adjustment software menu bar in the [Jig Mode Setup Screen] to terminate the adjustment software.
70
FinePix S3Pro Service Manual
<Fig. 4-14-6>
<Fig. 4-14-7>