Calibration Method Of Pattern Box; Adjusting Soft Installation; Various Downloading Software Decompressions, Preservation Methods, And Notes - FujiFilm FinePix S3Pro Service Manual

FinePix S3Pro Service Manual
4-4.

Calibration method of pattern box

< Use the pattern box for CAMERA adjustment >
Turn on the power supply in the pattern box.
Afterwards, wait for about ten minutes so that the source of
light may stabilize.
(1) Brightness:
160±5cd/m (with LB140 filter)
2
No chart, center of pattern box
Konica Minolta brightness meter LS-110 or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the brightness meter, adjust
the pattern box brightness to 160±5cd/m
(2) Color temperature:aa
6100±50 K (with LB140 filter)
No chart, center of pattern box
Konica Minolta color meter IIIF or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the color temperature meter,
adjust the pattern box color temperature to 6100 ± 50 K.
4-5.

Adjusting soft installation

4-5-1.

Various downloading software decompressions, preservation methods, and notes

The PC adjustment software are in a specified Web server,
and both of these are the compression of ZIP form files.
Therefore, after downloading these compression files from
the Web server, the decompression of the file is necessary.
In the decompression software, if the decompression of the
ZIP form can be done, any software is OK.
(Please prepare each one for the decompression software.)
The decompression and the preservation method of the PC
adjustment software and the firmware are described
to the following.
* The PC adjustment soft decompression and preservation
method
<Step1>
The sdjustment software is downloaded from WEB, and
software is installed in the PC.
We have uploaded the "PC Adjustment Software
(ZJ00853-100.zip) for "FinePixS3Pro" on our website:
(http://fujifilm-di.intranets.com/).
<Step2>
"ZJ00853-100" is a compression of "ZIP type" file.
The "FinePix S3Pro_W" folder can be done by extracting it
by "Compression software".
Copy the "FinePix S3Pro" and "SU-500" folder to the "C"
drive on the Adjustment PC.
.
2
4. Adjustments
<Fig. 4-4-1> Calibration method of pattern box
FxS3Pro W PC Soft Ver.1.00 ZJ00853-100.zip
<Fig. 4-5-1> Fujifilm-di.intranets Screen
My Computer
3.5inch FD(A:)
(C:)
ZJ00853-100
FinePixS3Pro_W
<Fig. 4-5-2>
Pattern BOX
(All white)
LB140
43