2. Disassembly
(5) Remove the 3 screws (BT2M 1.7 x 4.0 B).
(6) Remove the REAR FRAME in the direction of the
arrow.
(7) Remove the SW PWB ASSY in the direction of the
arrow.
[Notes on assembling the SW PWB ASSY]
1. Check that the top edge of the SW PWB ASSY is
engaged with the hook on the R CABI ASSY side.
2. Take care to avoid inserting the FPC on an angle and
ensure that it is fully inserted before locking.
3. Ensure that there are no gaps between the CABI
after assembly.
14
FinePix S3Pro Service Manual
Hook
7
6
5