2. Disassembly
2-2.
Removing the BATT CART ASSY
(1) Unlock the battery holder by turning the lock lever and
pull out the BATT CART ASSY.
2-3.
Removing the R CABI ASSY
(1) Open the CARD COVER.
(2) Open the DIGITAL TERMINAL COVER.
(3) Remove the 16 screws (N-MS2M 1.7 x 3.0 BA).
(4) Remove the R CABI ASSY in the direction of the arrow.
(5) Remove the MAIN-SW FPC from the connector (SW
PWB ASSY CN 102).
[Notes on assembling the R CABI ASSY]
1. Ensure that the FPC is not inserted on an angle and
that it is fully inserted before locking.
2. Confirm the IEEE1394 JACK is correctly matched to
the hole of R CABI ASSY.
3. Ensure that there are no gaps
between the CAMERA BODY
ASSY and R CABI ASSY after
assembly.
12
FinePix S3Pro Service Manual
1
4
2
3
3
3
1
3
5