Powering On The Switch - H3C S12500 Series Quick Start Manual

Figure 21 Connecting the console cable

Powering on the switch

Verify that the power cord is connected to the power source, power on the switch, and verify that the LEDs
on the switch are normal.
Table 2 LED description when the switch is operating properly
Module
MPU
Ethernet interface card
Switching fabric module
Power monitoring
module
Power module
LED
SFC (red/green)
LC (red/green)
FAN (red/green)
PWR (red/green)
RUN (red/green)
RUN (red/green)
RUN (red/green)
RUN (green)
MAJOR (red)
MINOR (yellow)
Power input (green)
Power output (green)
16
Status
Flashing green
Flashing green
Flashing green
Flashing green
Flashing green
Flashing green
Flashing green
Steady on
Off
Off
Steady on
Steady on