Important Safety Information; Lcd Display; Electrical Protection - Projecta SC030 Manual

12 volt 30 amp automatic solar charge controller
Table of Contents

Advertisement

IMPORTANT SAFETY INFORMATION

Please read this manual thoroughly before use and store in a safe place for future reference.
WARNING
• Please read these instructions completely prior to installation.
• Lead acid batteries can be dangerous. Ensure no sparks or flames are present when
working near batteries. Eye protection should be used. If mounting on a vehicle follow
all manufacturers' instructions.
• Given sufficient light solar panels always generate energy even when they are
disconnected. Accidental 'shorting' of the terminals or wiring can result in sparks
causing personal injury or a fire hazard. It is recommended to cover the front face
of the panel(s) with a soft cloth to block incoming light during installation.
• For use with 12V (nominal) solar panels.
• For indoor, out of weather use only.
• Do not exceed the total limit of the solar controller (360W/30A)
FEATURES
3 STAGE CHARGING
Ideal for deep cycle batteries the SC030 delivers 3 stage charging, maximising battery life
and performance.
• Maintains your battery ready for use
• Safe to leave permanently connected
• Prevents solar over-charge/discharge

LCD DISPLAY

Monitor your power system from the LCD display including charge rate and battery
voltage levels.
BATTERY CHEMISTRY SELECTION
Suitable for automotive, deep cycle and Gel batteries, select Gel or Wet modes for improved
charging results.

ELECTRICAL PROTECTION

• Short circuit & over current protection
• Reverse polarity protection
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents