Ubiquiti UniFi Quick Start Manual page 5

UniFi AP Ports
Secondary
Reset
The Reset button serves two functions for the UniFi AP:
• Restart Press and release the Reset button quickly.
Restore to Factory Default Settings
•
Reset button for more than five seconds.
Note:
Assembly before you can access the Reset button.
Alternatively, the UniFi AP may be reset remotely via a Reset
button located on the bottom of the Gigabit PoE adapter.
Cable Feed Opening
through this opening.
USB The USB 2.0 port is used to support the Speaker Assembly.
Main This Gigabit Ethernet port is used to carry power
and data.
Secondary
Port
Reset
Button
Reserved for future use.
You must remove the UniFi AP from the Speaker
The USB and Ethernet cables feed
Cable Feed
Opening
USB
Port
Main
Port
Press and hold the