Physical Configuration - Bticino Classe 300X Installation Manual

Classe 300X
Installation Manual
The physical configuration
is faster and it is suitable
for standard systems, e.g.
apartment blocks; use the
advanced configuration for
more complex systems
Are there controls that are
used more often than others?
Put them in the main page of
your device in order to have
them always at your disposal

Physical configuration

The device must be configured both physically or in
shown in the following table:
Note: the connection of the configurators to the N - P - M sockets precludes the possibility of using the
advanced configuration.
The configuration must be performed with the device disconnected from the power supply.
Before using it, wait for the LEDs to stop flashing.
Available Functions
Possibility of assigning various functions
FAVORITES KEY
QUICK ACTIONS
Private camera
The user can rename, delete and add
External intercom
Pager
Lock
FUNCTIONS The use of the functions is only available
through quick actions in the home page
Cameras
Intercom
Activations
advanced
Physical Configuration
See "Functions of the M units
configurator (Favorites key)"
Preset:
See "Functions of the M tenths
configurator (Quick actions)"
back, only the preset functions
See "Functions of the M tenths
configurator (Quick actions)"
12
mode, the main differences are
Advanced Configuration
Staircase Light function
Creating quick actions of all
functions
The user can decide the quick
actions to display in the home
page
Dedicated icons in the home
page and customisable,
configurable functions
See "Configuration"