Configurators - Bticino Classe 300X Installation Manual

The additional power supply
is necessary for all the devices
but one (main) on which, when
a call arrives, the video picture
and the ringtone switch
on. The main device always
switches off even without
additional power supply. If
instead the simultaneous
switching on of all devices is
not necessary, define the main
(MASTER) and the secondary
(SLAVE) devices with the
appropriate jumpers

Configurators

1 2 3 4 5
J1 J2 N P M
Configurator functions
1. J1 = Remove if the additional power supply is present (clamp 1 – 2)
2. J2 = For correct operation do not remove
3. NN = Device address
4. PP = Address of the EP of which you can open the Door Lock with IU idle, and to which you can
send the auto-on command
5. MM = Mode of operation according to the tables on the following pages
M units = Configuration of the FAVORITES
M tenths = Configuration of the QUICK ACTIONS in the Home page
Note: If the device is configured physically, the configuration MUST NOT BE MODIFIED using the menu.
capacitive key
13
Classe 300X
Installation Manual