Pivot Telephones
CONFIGURATION
BASIC CONFIGURATION
When the telephone is installed it is set with the following basic
configuration:
Bell volume level
Receiver volume level
Call tune
Dialling mode
Operating mode
FLASH (R) impulse time
Telephone book
Emergency number
To change the functions refer to the relevant sections.
RESETTING THE BASIC CONFIGURATION
The telephone's basic configuration can be reset at any time by
performing the following procedure:
Lift the receiver
Press the
(PROGRAM) key
Dial the number
0000
Press the
(PROGRAM) key to confirm
Wait for the confirmation tone (3 beeps) and hang up.
Note: "Resetting the basic configuration" does not alter the content
of the phone book or the emergency number.
= max
(3)
= max
(9)
= 0
(0)
= TOUCH TONE (9)
= EXT
(0)
= 100 ms
(1)
= empty
= empty
12
0-0-0-0
beep