Functional Description; Installing Or Removing Battery Cartridge - Makita DVC860L Instruction Manual

8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained
subject to the Dangerous Goods Legislation
requirements.
For commercial transports e.g. by third parties,
forwarding agents,
packaging and labeling must be observed.
For preparation of the item being shipped,
consulting an expert for hazardous material is
required. Please also observe possibly more
detailed national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11. Follow your local regulations relating to
disposal of battery.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will also
void the Makita warranty for the Makita tool and charger.
Tips for maintaining maximum battery life
1. Charge the
completely discharged.
Always stop tool operation and charge the
battery cartridge when you notice less tool
power.
2. Never recharge a fully charged
cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room
temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F).
Let a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
lithium-ion batteries
special requirement
battery cartridge

FUNCTIONAL DESCRIPTION

are
Use with AC power:
WARNING:
Before plugging the cleaner, always make sure
•
on
that the cleaner is switched off. Plugging the
cleaner with the switch on may cause an
unexpected start resulting in serious personal
injury.
015533
Connect the plug to a power supply.
1
before
015549
battery
The AC power indicator lights up when setting the
stand-by switch to "I" side.
NOTE:
Even operating in DC power mode , the tool is
•
automatically changed into AC power mode when
plugged in.
If the tool is unplugged during operation with the
•
battery inserted, the cleaner gets into stand-by
state.
Use with battery:

Installing or removing battery cartridge

CAUTION:
Always be sure that the cleaner is switched off,
•
unplugged, and the battery cartridge is removed
before adjusting or checking function on the tool.
Hold the cleaner and the battery cartridge
•
firmly when installing or removing battery
cartridge. Failure to hold the cleaner and the
battery cartridge firmly may cause them to slip off
your hands and result in damage to the cleaner
and battery cartridge and a personal injury.
5
1. Plug (the shape
1
1. AC power
1
2
and cord length
may differ from
country to
country)
indicator