Model DVC861L
(Powder filter (for dry dust) model)
1. Tank cover
2. Powder filter
3. Damper
4. Prefilter
5. Tank
015617
ASSEMBLY
CAUTION:
Always be sure that the cleaner is switched off,
•
unplugged, and the battery cartridge is removed
before carrying out any work on the cleaner.
Always wear dust mask during assembly or
•
maintenance.
Installing the powder filter and prefilter
(for dry dust)
(optional accessory for cloth filter model)
CAUTION:
Never pick up water or other liquids or wet dusts
•
when using the powder filter. Picking up such
things may cause the powder filter breakage.
1
2
3
4
5
1. Tank cover
2. Powder filter
3. Damper
4. Prefilter
5. Tank
6. Mounting position marking
015534
015551
To use powder filter, remove the float cage and float by
removing the bolts.
Place the prefilter in the tank.
Next, mount the damper on the powder filter and then
place them in the prefilter.
When installing powder filter and prefilter, align the
mounting position marking on each of them with that
one at the top of the tank.
Finally, mount the tank cover and lock it.
NOTE:
9
6
6
6
1
2
Before using the powder filter, make sure that
•
prefilter and damper are always used together. It is
not allowed to install powder filter solely.
1
2
3
4
5
1. Float
2. Float cage