Makita DVC860L Instruction Manual page 10

Installing the water filter
(for cloth filter model) (optional accessory)
CAUTION:
Never pick up water or wet dust without the float
•
and the cloth filter or the water filter.
For picking up wet dust, make sure that the float
•
cage and the float are installed on the cleaner.
When installing the water filter on the tank, set it
•
tight at the opening of the tank so that the hook of
the water filter engages the tank opening firmly
and there is no space between the water filter and
the tank.
NOTICE:
It is recommended using water filter when picking
•
up large amount of water repeatedly. Otherwise
vacuum ability may be reduced in case of cloth
filter.
3
3
015532
To pick up water or wet dust only, the water filter is more
suitable than the cloth filter.
When installing the water filter, align its mounting
position mark with the one on the tank.
Installing the paper pack (optional accessory)
WARNING:
When using the paper pack, also use the cloth
•
filter or prefilter together that is preinstalled on the
tool. Failure to use the cloth filter / prefilter
together may cause unusual noise and heat,
resulting in a fire.
CAUTION:
(For the cloth filter model)
Never pick up water or other liquids or wet dusts
•
when using the paper pack. Picking up such things
may cause the paper pack breakage.
Before using the paper pack, make sure that
•
powder filter
(optional accessory) and prefilter are always used
together.
(For the powder filter model)
Before using the paper pack, make sure that
•
powder filter, damper and prefilter are always used
together.
1. Remove the rubber holder.
1. Water filter
2. Tank
1
3. Mounting
position marking
2
(optional accessory),
1
015535
2. Extend the paper pack.
3. Align the paper pack opening with the dust
suction opening of the cleaner.
4. Insert the cardboard of the paper pack onto the
holder so that it is positioned at the end beyond
the detent protrusion.
1
015536
Installing the polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
1. Holder plate
damper
2. Polyethylene bag
015542
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
Spread the bag around the top of the tank so that the
prefilter edge can catch and hold the bag securely.
10
1. Rubber holder
1
1. Paper pack
2. Holder
2
1
2