Table of Contents
Advertisement
Important safety instructions for
wireless unit
1.
Never open the lid of the slot by yourself once
installing the wireless unit.
2.
Do not disassemble or tamper with the wire-
less unit.
3.
Keep the wireless unit away from young chil-
dren. If accidentally swallowed, seek medical
attention immediately.
4.
Use the wireless unit only with Makita tools.
5.
Do not expose the wireless unit to rain or wet
conditions.
6.
Do not use the wireless unit in places where
the temperature exceeds 50 °C (122 °F).
7.
Do not operate the wireless unit in places
where medical instruments, such as heart
pace makers are nearby.
8.
Do not operate the wireless unit in places
where automated devices are nearby. If oper-
ated, automated devices may develop malfunction
or error.
9.
Do not operate the wireless unit in places
under high temperature or places where
static electricity or electrical noise could be
generated.
10. The wireless unit can produce electromagnetic
fields (EMF) but they are not harmful to the
user.
11.
The wireless unit is an accurate instrument. Be
careful not to drop or strike the wireless unit.
12. Avoid touching the terminal of the wireless
unit with bare hands or metallic materials.
13. Always remove the battery on the product
when installing the wireless unit into it.
14. When opening the lid of the slot, avoid the
place where dust and water may come into the
slot. Always keep the inlet of the slot clean.
15. Always insert the wireless unit in the correct
direction.
16. Do not press the wireless activation button
on the wireless unit too hard and/or press the
button with an object with a sharp edge.
17. Always close the lid of the slot when
operating.
18. Do not remove the wireless unit from the slot
while the power is being supplied to the tool.
Doing so may cause a malfunction of the wireless unit.
19. Do not remove the sticker on the wireless unit.
20. Do not put any sticker on the wireless unit.
21. Do not leave the wireless unit in a place where
static electricity or electrical noise could be
generated.
22. Do not leave the wireless unit in a place sub-
ject to high heat, such as a car sitting in the
sun.
23. Do not leave the wireless unit in a dusty or
powdery place or in a place corrosive gas
could be generated.
24. Sudden change of the temperature may bedew
the wireless unit. Do not use the wireless unit
until the dew is completely dried.
25. When cleaning the wireless unit, gently wipe
with a dry soft cloth. Do not use benzine, thin-
ner, conductive grease or the like.
26. When storing the wireless unit, keep it in the
supplied case or a static-free container.
27. Do not insert any devices other than Makita
wireless unit into the slot on the tool.
28. Do not use the tool with the lid of the slot dam-
aged. Water, dust, and dirt come into the slot may
cause malfunction.
29. Do not pull and/or twist the lid of the slot more
than necessary. Restore the lid if it comes off
from the tool.
30. Replace the lid of the slot if it is lost or
damaged.
SAVE THESE INSTRUCTIONS.
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the appliance
is switched off and the battery cartridges are
removed before adjusting or checking function on
the appliance.
Installing or removing battery
cartridge
Always switch off the tool before
CAUTION:
installing or removing of the battery cartridge.
CAUTION:
Hold the cleaner and the battery
cartridge firmly when installing or removing bat-
tery cartridge. Failure to hold the cleaner and the
battery cartridge firmly may cause them to slip off
your hands and result in damage to the cleaner and
battery cartridge and a personal injury.
Be careful not to pinch your fin-
CAUTION:
gers when opening or closing the battery cover.
Failure to do so may cause personal injury.
To install the battery cartridge, release the lock first, and
then open the battery cover. After that, insert the battery
cartridge.
2
1
Fig.1
► 1 . Lock 2. Battery cover
6 ENGLISH
Advertisement
Table of Contents
