Table of Contents
Advertisement
Caution: Do not touch the green chip on the cartridge. Install the new cartridge immediately after
removing the old one; if you do not, the print head may dry out and be unable to print.
7. Gently shake the ink cartridge horizontally for about five seconds as shown.
Caution: Do not remove any labels or seals, or ink will leak.
8. Insert the new cartridge into the holder and push it in until it clicks into place.
9. If the Cartridge Check option is displayed on the LCD screen, press the OK button to make sure the
cartridges are installed correctly.
Caution: If necessary, press in the ink cartridge until it clicks into place.
10. When you are finished, close the front cover.
The product starts priming the ink and returns to its previous state when finished.
Note: Do not turn off the printer during ink replacement.
172
Advertisement
Table of Contents
