System Log - D-Link Wireless AC1200 User Manual

Section 3 - Configuration
The router keeps a running log of events. The logs can be sent to a Syslog server, and delivered to your email address.
From the Management menu, click System Log.
Enable Logging Enable to send the router logs to a SysLog Server. If this is disabled,
to Syslog there will be no other options on this page.
Server:
Syslog Server IP
Enter the IP address for the Syslog server. If the Syslog server is
Address: connected to the router, you can select it from the drop-down menu
to automatically populate the field.
Enable E-mail
Enable this option if you want the logs to be automatically sent to
Notification: an e-mail address. Then enter the settings for your e-mail account.
These can be obtained from your e-mail service provider.
Send When Log
If e-mail notification is enabled, you may also enable this option.
Full: When the log is full, the router will send it by e-mail.
Send on Enable to send an e-mail according to a specified schedule.
Schedule:
Schedule: If you enable Send on Schedule, use the drop-down menu to select
the schedule that the rule will be enabled on. The schedule may be
set to Always Enable, or you can create your own schedule from the
Schedules section (refer to page 71).
Click Save when you are done.
D-Link DIR-850L User Manual

System Log

72